M-BUS Gateway: Unterschied zwischen den Versionen

Aus smart-me
Wechseln zu: Navigation, Suche
(dimensions and wiring)
(Compatible Water, Heat and Gas Meters)
 
(4 dazwischenliegende Versionen desselben Benutzers werden nicht angezeigt)
Zeile 1: Zeile 1:
The smart-me M-BUS Gateway allows M-BUS meters to connect directly to the smart-me Cloud. Through its integrated Wi-Fi connection no additional hardware is needed. The smart-me M-BUS Gateway makes use of the existing Wi-Fi network and automatically uploads the meter data of the different meters (electricity, water, heat, gas and temperature) into the smart-me Cloud.  
+
== General Information ==
 +
The smart-me M-Bus Gateway reads all energy meters with the M-Bus interface according to EN 13757-2, -3. Since it uses the existing WLAN network, no additional hardware needs to be installed. The meter data for the various energy sources (water, heat, gas, temperature) are transferred directly to the smart-me cloud and can be used in the higher-level smart-me energy management system.
  
An incredible solution to make energy intelligent.
 
  
'''Functions'''
+
== Functions==
* M-BUS Gateway to the smart-me Cloud
+
* M-Bus Gateway to the smart-me Cloud
* Integrated level converter for 50 M-BUS meters
+
* Integrated level converter for 50 M-Bus loads, with repeaters up to 100 slaves
* Integrated power adapter
+
* Integrated power supply
* Supports all M-Bus devices according EN13757-2, -3 (formerly EN1434-3)
+
* Supports all M-Bus devices according to EN13757-2, -3 (formerly EN1434-3)
* Direct (encoded) Wi-Fi connection to the smart-me Cloud
+
* Encrypted WLAN connection directly to the smart-me Cloud
* Easy setup with smartphone or tablet
+
* The integrated datalogger synchronizes automatically as soon as a connection is available
* Integrated Data logger for 6000 telegrams (in case of connection failures)
+
* Easy installation with the free smart-me app for Android and iOS
* Automatic Sync (in case of connection failures)
+
* Energy data management, billing , alarms, etc. on smart-me.com
+
  
 
[[Datei:SmartMeMBusGateway1.png]]
 
[[Datei:SmartMeMBusGateway1.png]]
Zeile 19: Zeile 17:
 
   
 
   
 
*Operating Voltage: 100 - 240 VAC
 
*Operating Voltage: 100 - 240 VAC
*Number of M-BUS slaves: 50 standard loads
+
*Number of M-Bus slaves: 50 standard loads
*M-BUS baud rate: 300, 2400, 9600 (Automatic search and detection)
+
*M-Bus baud rate: 300, 2400, 9600 (automatic search and detection)
 
*Assembly: DIN-Rail
 
*Assembly: DIN-Rail
 
*Width: 2 Modules, 36 x 90 mm
 
*Width: 2 Modules, 36 x 90 mm
*Interfaces: M-BUS, Wi-Fi
+
*Interfaces: M-Bus, Wi-Fi
 
*Data logger: 6000 Telegrams
 
*Data logger: 6000 Telegrams
 
*Firmware update: Online
 
*Firmware update: Online
 
*Galvanic seperation: Yes
 
*Galvanic seperation: Yes
*Temperature range: 0 – 55°C
+
*Temperature range: -25 to 55°C
 
*Installation / Configuration: smart-me App (Android/iOS)
 
*Installation / Configuration: smart-me App (Android/iOS)
  
 
[https://smart-me.com/Description/pdf/en/mbusGatewayV1.pdf Datasheet]
 
[https://smart-me.com/Description/pdf/en/mbusGatewayV1.pdf Datasheet]
 +
 +
== Compatible Water, Heat and Gas Meters ==
 +
Are you also supposed to be on this list? If your product supports the M-Bus standard EN13757-2, -3 (formerly EN1434-3), we will gladly list it among the compatible device manufacturers. Please contact us by email (verkauf@smart-me.com).
  
 
== Dimensions and Wiring ==
 
== Dimensions and Wiring ==
  
 
[[Datei:Massbild Gateway.odt.png|links]]    [[Datei:Anschluss Gateway.png|zentriert]]
 
[[Datei:Massbild Gateway.odt.png|links]]    [[Datei:Anschluss Gateway.png|zentriert]]
 +
 +
== Downloads ==
 +
More information can be found under [[Downloads]]

Aktuelle Version vom 10. Juli 2019, 16:00 Uhr

General Information

The smart-me M-Bus Gateway reads all energy meters with the M-Bus interface according to EN 13757-2, -3. Since it uses the existing WLAN network, no additional hardware needs to be installed. The meter data for the various energy sources (water, heat, gas, temperature) are transferred directly to the smart-me cloud and can be used in the higher-level smart-me energy management system.


Functions

  • M-Bus Gateway to the smart-me Cloud
  • Integrated level converter for 50 M-Bus loads, with repeaters up to 100 slaves
  • Integrated power supply
  • Supports all M-Bus devices according to EN13757-2, -3 (formerly EN1434-3)
  • Encrypted WLAN connection directly to the smart-me Cloud
  • The integrated datalogger synchronizes automatically as soon as a connection is available
  • Easy installation with the free smart-me app for Android and iOS

SmartMeMBusGateway1.png

Technical Details

  • Operating Voltage: 100 - 240 VAC
  • Number of M-Bus slaves: 50 standard loads
  • M-Bus baud rate: 300, 2400, 9600 (automatic search and detection)
  • Assembly: DIN-Rail
  • Width: 2 Modules, 36 x 90 mm
  • Interfaces: M-Bus, Wi-Fi
  • Data logger: 6000 Telegrams
  • Firmware update: Online
  • Galvanic seperation: Yes
  • Temperature range: -25 to 55°C
  • Installation / Configuration: smart-me App (Android/iOS)

Datasheet

Compatible Water, Heat and Gas Meters

Are you also supposed to be on this list? If your product supports the M-Bus standard EN13757-2, -3 (formerly EN1434-3), we will gladly list it among the compatible device manufacturers. Please contact us by email (verkauf@smart-me.com).

Dimensions and Wiring

Massbild Gateway.odt.png
Anschluss Gateway.png

Downloads

More information can be found under Downloads